All new image drum unit oki что это
All new image drum unit oki что это
Все мы понимаем, что основная прибыль производителей печатной техники получается с продажи оригинальных расходных материалов. Но значительные валютные колебания привели к тому, что покупка оригинальных расходных материалов стала роскошью, а не повседневностью. Наученные горьким опытом большинство компании, прежде чем приобретать печатную технику, первым делом интересуются возможностью заправки этой самой техники. Если техника не заправляется и не обладает уникальным функционалом в своей ценовой категории, то продать ее почти нереально, если конечно оригинальная “расходка” не стоит копейки. В рамках этой заметки хотел бы раскрыть тему про заправку принтеров и МФУ OKI B412 / B432/ B512/ MB472 / MB492/ MB562 построенных на единой печатной платформе.
Про чипы.
Наконец в конце января пришла первая партия долгожданных чипов от производителя ApexMic. Прежде всего, оказалось, что производитель выпускает чипы двух видов. Первый вид чипов напоминает стандартные чипы OKI B411 и предназначен для установки в стартовые тубы с тонером. Второй вид чипов предназначен для установки в отдельно купленные тубы и по форме ближе к квадрату. Не смотря на значительные визуальные отличия чип нового формата, довольно легко устанавливается в стартовую тубу с последующей его фиксацией термоклеевым стержнем. Стоимость чипов напрямую зависит от их ресурса. Самый дешевый на 3000 страниц и самый дорогой на 12000 страниц. Разброс цен у поставщиков весьма колоссален и достигает до 1000 рублей за штуку. Чипы, протестированные мною, были закуплены в компании Рамис по самой адекватной цене 890 рублей за чип на 3000 страниц, тот же чип в компании Чипкарт стоит 1690 рублей. Чипы тестировал на аппарате OKI MB492DN и перед тестированием чипов произвел прошивку аппарата до последней версии. Протестированные мною чипы стартовали с первого раза без проблем, и аппарат реагировал на них надписью об установке оригинальной продукции OKI. Я тестировал чипы объемом на 3к и 7к, смысла в покупке чипов на 12к на мой взгляд нет смысла, чип самый дорогой, а картридж самый доступный по цене. Картридж максимального объема 45807121 на 12000 страниц продается по разумной цене в 6650 рублей.
Про тонеры
Как и все аппараты, использующие раздельные расходные материалы аппараты OKI требуют тщательного подбора тонера для исключения появления фона при печати. Часто сталкиваюсь с тем, что люди рекомендуют использовать для заправки картриджей OKI монохромные тонеры Samsung. Это весьма сильное заблуждение, которое может привести аппарат к поломке. У принтеров OKI печка имеет более низкую температуру закрепления и для нормальной фиксации тонера на бумаге необходимо использовать специальные легкоплавки тонеры. Использование тугоплавких тонеров приводит появления налета на тефлоновом валу, с последующие выгоранием тефлонового покрытия. Вместо положенных 200.000 страниц, печки выходят из строя уже при пробеге не более 15000 страниц. Это я к тому, что при заправке картриджей для OKI MB472DN и прочих современных аппаратов OKI не стоит использовать дешевые китайские тонеры и прочие тонеры от других вендоров. Для заправки картриджей OKI наша компания использует тонеры производства Tomoegawa предназначенные для нового поколения монохромных принтеров OKI B411. В случае отсутствия этого тонера у поставщика, используется универсальный тонер Static Control в килограммовой фасовке. Все эти тонеры не требуют чистки драма от остатков старого тонера и имеют низкую температуру плавления.
Про драм-картриджи и сброс.
За драм-картриджи инженерам OKI отдельное спасибо. Наконец-то они избавились от рециклинговой системы печати. Новые драмы подросли в размере аж в два раза, обзавелись емкой полостью для отработанного тонера. Также драм обзавелся качественным датчиком тонера, позаимствованным от цветных аппаратов OKI. Счетчик драм-картриджа сбрасывается стандартным предохранителем заимствованным с цветных принтеров OKI. Стартовый драм картридж не содержит контактов для сброса счетчика и для сброса необходимо устанавливать предохранитель непосредственно на контакты в аппарате.
Про тонер-картридж и бесчиповый режим.
А вот с картриджами для новых принтеров и МФУ OKI повезло. Предыдущее поколение принтеров и МФУ OKI и новое используют один и тот же драм-картридж 44574302, поэтому конструктивно тубы идентичные и как я писал выше все отличите только в креплении чипа. Стартовый картридж и новый картридж на 7000 страниц имеют одинаковые размеры. Поэтому стартовый картридж можно заправлять на 7000 страниц. А вот картридж на 12000 страниц имеет несколько большие размеры. Кстати в стартовом картридже отсутствует чип и данные о емкости стартового картриджа хранятся в микросхеме 24с64 на плате форматера. Фактически можно снять дамп микросхемы с нового аппарата и переделав микросхему под разъем DIP8 посаженную в “кроватку” можно получить вечный бесчиповый режим, просто время от времени перепрошивая микросхему на программаторе считанным ранее дампом.
На этом пожалуй закончу заметку. В заметке я старался осветить моменты, которые на мой взгляд являются ключевыми. От себя рекомендую использовать исключительно оригинальные драм-картриджи и не доводить их до “ручки”.
All new image drum unit oki что это
Инструкция по сбросу счётчика барабана популярных моделей OKI B432, OKI MB472, а также их аналогов Kraftway KRP 432 и Kraftway KRP 472 находится чуть ниже на этой странице!
Сообщение о необходимости смены барабана (оно может выглядеть так: «The printer is in following state: The image drum has reached the end of its life. Replace the image drum and reset the Drum Count» или так: «Печатающий барабан выработал свой ресурс, замените барабан и сбросьте счётчик барабана») возникает тогда, когда внутренний счетчик барабана доходит до определенного числа напечатанных страниц. Число это различно для различных моделей принтеров. Обратите внимание, что к самому барабану этот счётчик отношения не имеет и находится именно внутри принтера! Есть ошибочное мнение, что барабаны, купленные в Америке, заявленный ресурс которых больше чем у барабанов, купленных в Европе (включая Россию) проходят дольше. Это чистой воды заблуждение, не поддавайтесь ему! Появление такого сообщения, обычно, не означает, что Вам необходимо немедленно заменить барабан на новый. Если качество печати Вас устраивает, можно продолжать работать с использованием старого барабана до тех пор, пока качество не станет неудовлетворительным. После этого необходимо установить новый барабан и сбросить внутренний счетчик.
Для принтеров OKIPAGE с панелью управления, оснащённой ЖКИ (6ex / 10ex / 10i / 12i / 14ex / 14i / 20 / 24), принтер необходимо выключить, а затем вновь включить, удерживая нажатой клавишу Menu1/Menu2. В появившемся меню обслуживания пользователем (USER MNT) путём многократных нажатий кнопки Menu1/Menu2 необходимо найти пункт DRUM CNT RESET и нажать клавишу Enter. После этого сообщение пропадает.
Для принтеров OKI В4300 / B4350 / B4600 (c панелью управления, оснащённой ЖКИ) кнопкой ONLINE принтер нужно перевести в автономный режим, нажатием на кнопку MENU дойти до пункта MAINT MENU, нажать Select; нажимать кнопку Item до появления пункта DRUM COUNT RESET и нажать кнопку Select
Подробно эти действия описаны в соответствующей принтеру инструкции пользователя.
Для принтеров ОКИ серии В4000 без панели управления (B4100/B4200/B4200L/B4250/B4400) существует альтернативный беспрограммный вариант сброса счётчика фотобарабана.
1. Выключите принтер
2. Откройте верхнюю крышку
3. Нажмите и удерживайте кнопку на панели принтера, при этом включите принтер
4. Индикаторы на панели несколько раз помигают. Когда они перестанут мигать, отпустите кнопку
5. Счётчик фотокартриджа будет сброшен.
Для принтеров серии B400 (модели OKI B401 / B410 / B411 / B412 / B430 / B431 / B432 / B440 / B512) и построенных на их базе МФУ, включая популярные модели OKI MB472 и Kraftway KRP 472 сброс счётчика барабана осуществляется автоматически при установке в принтер нового драм-картриджа, что вызовет сжигание предохранителя, находящегося в драм-картридже при условии, что тонер-картридж не пустой и только в тот момент, когда принтер остановился с требованием заменить фотобарабан! Будьте внимательны: если вы заменяете драм-картридж как описано в руководстве пользователя, то остаток тонера в тубе при замене должен быть не ниже 50%, иначе порошок, просыпавшись в бункер нового драма заставит принтер словить состояние Toner Low, в результате чего чип на тонер-картридже заблокируется и сброс счётчика барабана не произойдёт! Поэтому если тонера остаётся мало, при замене барабана на этих моделях обязательно меняйте и тонер-картридж!
Error Message List
Toner Low.
The toner cartridge is running low.
Prepare a new toner cartridge.
* If the key > [Admin Setup] > [Management] > [System Setup] > [Near life LED] is set to [Disable], the LED does not turn on.
Toner cartridge is not intended for use with this printer model.
A toner cartridge is not intended for use with this type of the printer.
Check the printer type on the box of the indicated toner cartridge. Use the toner cartridge which is intended for use in this type of the printer.
Error Postscript
A Postscript error has occurred.
Image Drum Near Life.
The Image Drum Unit is near the end of its life.
Prepare a replacement image drum.
* If the key >[Admin Setup] > [Management] > [System Setup] > [Near Life Status] is set to [Enable] and [Near life LED] is set to [Disable], the LED does not turn on.
If [Near Life Status] is set to [Disable], this message is not displayed and the LED does not turn on.
Toner Empty.
The toner cartridge is empty.
Replace it with a new toner cartridge.
Toner cartridge not installed.
The toner cartridge is not properly installed.
Reinstall it properly.
Replace the image drum.
The Image Drum Unit is at the end of its life.
Tray 1 Empty.
Load paper in the tray.
Tray 2 Empty.
Load paper in the tray.
MP Tray Empty.
The MP Tray is empty.
Load paper in the tray.
Disk Memory Full
The file system is full.
File System is write protected.
The file system to which you tried to write is write-protected.
Insufficient page memory to collate.
The memory has overflowed.
If you are performing other tasks simultaneously, finish them and try again. If this does not work, reduce the print resolution.
Refer to the following for copy.
Refer to the following for fax.
Insufficient memory.
The memory overflowed while the MFP was receiving a PC Fax job.
Reduce the data size of the job.
Unauthorized user, job cancelled.
The MFP deleted a job of an unauthorized user.
Contact the administrator of the MFP.
Erasing a secret file.
Deleting encrypted authentication print data.
Deleting an encrypted job.
Erased Data Full.
Secret files to be erased are full.
Contact the administrator of the MFP.
Secure job storage period exceeded. This job has been deleted.
The machine deleted an expired secure job.
Disk Read/Write Error [FS_ERR]
A disk operation error has occurred.
Contact the administrator of the MFP, or contact your dealer.
Invalid print data received.
The machine received and deleted unauthorized PC fax data. While the machine received the PC fax data, the connection with the computer might be unstable.
Check the connection between the machine and the computer.
Feed print job manually. Set [MEDIA_SIZE] in the multi-purpose tray, and select [Start].
Manual feed mode. Press [Start].
Please change [MEDIA_SIZE] [MEDIA_TYPE] in Tray 1.
The media type in Tray 1 is different from that specified with the printer driver.
Load the indicated media type of paper.
Please change [MEDIA_SIZE] [MEDIA_TYPE] in Tray 2.
The media type in Tray 2 is different from that specified with the printer driver.
Load the indicated media type of paper.
Please change [MEDIA_SIZE] [MEDIA_TYPE] in MP Tray.
The media type in the MP tray is different from that specified with the printer driver.
Load the indicated media type of paper.
Please change [MEDIA_SIZE] [MEDIA_TYPE] in Tray 1.
The media size in Tray 1, or both the media size and type in Tray 1 are different from those specified with the printer driver.
Load the indicated size or type of paper.
Please change [MEDIA_SIZE] [MEDIA_TYPE] in Tray 2.
The media size in Tray 2, or both the media size and type in Tray 2 are different from those specified with the printer driver.
Load the indicated size or type of paper.
Please change [MEDIA_SIZE] [MEDIA_TYPE] in MP Tray.
The media size in MP tray, or both the media size and type in MP tray are different from those specified with the printer driver.
Load the indicated size or type of paper.
Please check data. Message Data Write Error [CODE]
An error has occurred in downloading language data that is used for the display on the operator panel or data printing.
Contact your dealer.
Paper Tray 1 is empty. Set [MEDIA_SIZE]
Load the indicated size paper.
Paper Tray 2 is empty. Set [MEDIA_SIZE]
Load the indicated size paper.
Paper MP Tray is empty. Set [MEDIA_SIZE]
The MP tray is empty.
Load the indicated size paper.
Please close TRAY1.: To cancel, select [Cancel]. Error code: 430
A paper cassette is not in Tray 1.
Insert the paper cassette into Tray 1.
If the cassette is already inserted in the machine, pull out the cassette and set it again to correctly locate it.
Insert the paper cassette in the designated tray.
If the cassette is already inserted in the printer, pull out the cassette and close it again correctly.
Please close TRAY2.: To cancel, select [Cancel]. Error code: 440
A paper cassette is not in Tray 2.
Insert the paper cassette into Tray 2.
If the cassette is already inserted in the machine, pull out the cassette and set it again to correctly locate it.
Insert the paper cassette in the designated tray.
If the cassette is already inserted in the printer, pull out the cassette and close it again correctly.
Tray 1 cassette is missing. Open and Close the indicated cassette.
A paper cassette is not in Tray 1.
Insert the paper cassette into Tray 1.
If the cassette is already inserted in the machine, pull out the cassette and set it again to correctly locate it.
Insert the paper cassette in the designated tray.
If the cassette is already inserted in the printer, pull out the cassette and close it again correctly.
Tray 2 cassette is missing. Open and Close the indicated cassette.
A paper cassette is not in Tray 2.
Insert the paper cassette into Tray 2.
If the cassette is already inserted in the machine, pull out the cassette and set it again to correctly locate it.
Insert the paper cassette in the designated tray.
If the cassette is already inserted in the printer, pull out the cassette and close it again correctly.
Insufficient memory.
The memory overflowed.
Reduce the print resolution set for the print data that caused this error.
Reduce the size of the print data if step (1) did not work.
Toner Empty. Replace with new Toner Cartridge.
Toner cartridge not installed.
Toner cartridge not properly installed.
Toner cartridge not properly installed.
Something is wrong with the toner sensor during printing.
Check that the toner cartridge is installed properly.
Paper Size Error.
A tray may hold paper of a different size from the setting, multiple sheets of paper may have been loaded at once, or other causes may exist.
Open and close the cover to perform recovery printing, and continue.
Paper jam has occurred. Please open the scanner unit and the top cover to check. Error: 390
Paper jam has occurred.
Remove the jammed paper.
Error 390 : MP Tray
Paper jam has occurred. Remove and check the [TRAY] cassette. Error: 391, 392
Paper jam occurred while feeding paper from the indicated tray.
Remove the jammed paper.
Paper jam has occurred. Please open the scanner unit and the top cover to check. Error: 380, 381, 382, 385, 389
Paper jam has occurred.
Remove the jammed paper.
Error 380 : Paper Feed
Error 381 : Transport
Error 389 : Printing Page Lost
Paper jam has occurred. Please open the scanner unit and the top cover to check. Error: 370, 371, 372
Paper jam has occurred.
Remove the jammed paper.
Error 372 : Miss feed from Duplex
Image Drum Life. Replace with new image drum.
The Image Drum Unit is at the end of its life.
Toner cartridge not properly installed.
Toner cartridge not properly installed.
Open the scanner unit and the top cover.
Check that the blue release lever of the toner cartridge is rotated in the direction of the arrow of the lock mark on the toner cartridge until it stops.
Close the top cover and scanner unit.
Image Drum not properly installed.
The image drum is not installed properly.
[COVER] Open Error: 310, 587
Power OFF/ON [ERRCODE]: Error
An error has occurred in the device.
Turn the machine off and then on again.
If the error is not resolved, contact your dealer.
Inspection is required. [ERRCODE]: Error
An error has occurred in the device.
Contact your dealer.
Insufficient memory.
The memory overflowed.
Try again after stopping any other function of the MFP ends.
Reduce the printer resolution when the step (1) did not work.
Automatic document feeder (ADF) cover is open.
The ADF cover is open.
Close the ADF cover.
Document jam has occurred. Open the automatic document feeder (ADF) cover on the scanner to check.
A document jam has occurred.
Open the ADF cover, and then remove the jammed paper.
Scanner lamp error check the lamp. [CODE]
Indicates that a lamp error has occurred.
This message is displayed because of the light intensity of the lamp is weak.
Contact your dealer.
Power OFF/ON Carriage Error
Indicates that a carriage error has occurred.
This message is displayed because of the scanner carriage is not working normally.
If the error is not resolved, contact your dealer.
Unable to save as USB memory is full.
USB Memory is full and cannot store data.
Delete unnecessary files from USB Memory, or use USB Memory with enough available space.
Writing to USB memory failed.
Writing to USB Memory has failed.
Remove the write-protection of the connected USB Memory.
Please see Help for details.
Unable to save as USB memory is not connected.
USB Memory is not connected to the machine and the machine cannot store data.
Be sure that USB Memory is connected to the machine properly.
Connect to PC failed.
The machine has failed to connect to a PC.
Be sure that the machine is connected to the PC properly.
Power OFF/ON Carriage Error [CODE]
Indicates that the following carriage error has occurred.
2 : Home position error (carriage connection error)
3 : Scanning start position detection error If the error is not resolved, contact your dealer.
Insufficient memory occurred during Rx.
Memory overflowed during fax reception. Exit other functions that are in use.
Delete all unnecessary documents.
Communication error Tx
Fax transmission and reception have been canceled due to errors.
Telephone
The telephone is being used.
Wait for the call on the telephone lines to end.
File Transmission Error
A file transmission error has occurred.
Check the network configuration, cable connection and status, and the server status.
E-mail Transmission Error
An e-mail transmission error has occurred.
Check the network configuration, cable connection and status, and the server status.
Please check SMTP settings.
An error has occurred while connecting to an SMTP server.
Check the network configuration, cable connection and status, and the server status.
Check the SMTP settings.
Please check POP3 settings.
An error has occurred while connecting to a POP3 server.
Check the network configuration, cable connection and status, and the server status.
Check the POP3 settings.
SMTP Login failed.
Login to an SMTP server has failed.
Check the login name and password for the server.
SMTP Auth. Unsupported
The SMTP server does not support authentication.
POP3 Login failed.
Login to a POP3 server has failed.
Check the login name and password for the server.
Getting target IP failed. Please check DHCP settings.
The machine could not get IP address from DHCP server.
Check the network configuration, cable connection and status, and the server status.
Failed to connect to DNS server. Please check DNS settings.
An error has occurred while connecting to a DNS server, or the machine has failed to obtain IP address.
Check the network configuration, cable connection and status, and the server status.
Check the DNS settings.
Check the [Target URL] in the profile, and check that the computer name has been correctly set.
If there is no DNS server on the network, set the IP address, not the computer name, in the profile [Target URL].
If the username is managed from the domain, input «Username @ Domainname» on [Username] settings.
Please check Server setting.
An error has occurred while connecting to a file server.
Check the network configuration, cable connection and status, and the server status.
Check the server settings.
If the username is managed from the domain, input «Username @ Domainname» on [Username] settings.
Server Login failed.
The machine failed to access the FTP server directory.
Entering directory failed.
The MFP failed to access the server directory.
Contact the administrator of the MFP.
Or, contact your server administrator.
Changing data Transfer Type failed.
The machine failed to transmit a file to an FTP server.
Change the data transfer type for the file.
File writing failed.
The machine failed to write to a file.
Check that the username set on the computer and the [Username] set on the profile match one another.
It is possible that the settings are configured to not allow writing to common folders. Check the folder shared settings.
FTP destination Full.
The storage space of the server is full. The machine failed to write to a file.
Please change File Name.
A file name was not authorized by the server.
Change the file name.
If using an FTP server to save data with Scan to Network PC, there are some machines that cannot be connected correctly due to mismatching character codes. Change [Host side Japanese Kanji code]. If using a Mac for the FTP server, change [Host side Japanese Kanji code] to [UTF-8].
Device communication protocol not supported.
The machine does not support the specified server.
If using NAS to save data with Scan to Network PC, in rare cases there are machines that cannot connect correctly with CIFS. Change the profile [CIFS Character Set] to [Shift-JIS] from [UTF-16].
Please check Network Share Name.
The name of a network shared folder is invalid.
The machine failed to establish a CIFS connection.
Change the name of the shared folder.
Tray 1 missing.
A paper cassette is not in Tray 1.
Insert the paper cassette into Tray 1.
If the cassette is already inserted in the machine, pull out the cassette and set it again to correctly locate it.
Insert the paper cassette in Tray 1.
If the cassette is already inserted in the printer, pull out the cassette and close it again correctly.
Restricted access error Data deleted due to printing restrictions.
A print job sent by a user who is not authorized for printing is deleted.
Incompatible USB device connected. Remove the connected USB device.
A USB device that is not supported by the machine is connected, or the USB device is not recognized properly.
Please remove the connected USB device. USB device has not been recognized.
Please remove the USB Hub. USB Hub is connected.
A USB hub has been connected. This machine does not support the USB hub.
Disconnect the USB hub.
Inspection is required. [ERRCODE]: SIP Error
Processing of scanned image has failed.
Turn the machine off and then on again.
If the error is not resolved, contact your dealer.
Accounting Log buffer is near full.
The job accounting log buffer is nearly full.
Accounting Log Writing Error
The MFP encountered a job accounting log write error.
Contact the administrator of the MFP.
Or, contact your dealer.
SIP Firmware Missing
A board failure has been detected.
Turn the machine off and then on again.
If the error is not resolved, contact your dealer.
Job log write error
A job accounting log writing error has occurred.
Accounting Log Buffer Full (Delete old logs)
Delete old accounting logs because the accounting log buffer is full.
«Power OFF/ON» / «xxx:Error » or «Inspection is required» / «xxx:Error «
An error has occurred in the device.
The detailed information about the error is displayed.
Contact your dealer.
Power OFF/ON 209:Download Error
An error has occurred in the device.
Restart the device.
A decoding error occurred. Check the image data.
An error has occurred during analysis of image data entered from outside of the MFP.
For PrintFromUSBMemory or InternetFAX/E-mailPrint/FaxToPrint (with communication data saving), an error has occurred in the TIFF or JPEG data analysis.
Access denied to PC. Please check PC.
The PushScan request has been rejected by the PC.
Error PDF
A methodology error has been detected in a PDF.
Please check whether the PDF file opened correctly.
This PDF file is password protected.
This is a PDF file with the encryption function enabled.
When printing an encrypted PDF file, open it in your computer and then print it.
Valid password required to print document.
This is a PDF file with the encryption function enabled.
When printing an encrypted PDF file, open it in your computer and then print it.
No communication with the SNTP server.
USB Memory disconnected.
Data was not read from USB Memory, because it was not connected.
Connect USB Memory.
Cannot open the file.
The PrintFromUSBMemory function has failed to open the specified file.
Cannot read the file.
The PrintFromUSBMemory function has failed to process due to the failure of destination device or others.
Toner cartridge not properly installed.
The toner cartridge is not installed properly.
Face-up stacker is open, so 2-sided printing is disabled. Close the face up stacker. Error code: 581
Although Duplex printing was attempted, the Faceup stacker is open and Duplex printing is disabled.
Printing was stopped. Face-up stacker was opened during printing. Open the top cover. Error code: 409
Paper jammed because the faceup stacker was opened and closed during printing. Open the rear cover, and then remove the jammed paper.
Wait Timeout in menu is disabled. Printing is disabled except by USB. Clear page buffer and enable time out in menu.
PDF Cache Write Error
Free space in storage was low when a file was being temporarily saved for PDF Print.
Increase free space in memory, and print again.
Insufficient memory occurred during Fax Tx reservation.
A memory overflow occurred during fax memory transmission.
Printer Life
The printer has entered the maintenance period.
Contact your dealer.
Replace the image drum.
The Image Drum Unit is at the end of its life.
E-mail receiving has been cancelled.
E-mail receiving has been cancelled. An attached file may have exceed its size limit.
Or, the format of e-mail or the attached file may be not supported.
Check network configuration, cable connection and status, and the server status.
If it is not improved, contact the administrator of the MFP.
Please Call Service. Fax Combination Error
System cannot detect the fax modem. Or, system detect the fax modem unnecessarily.
Exchange of the Scanner Unit is necessary.
Contact the administrator of the MFP.
Or, contact your dealer.
Wireless startup failed.
Wireless startup failed.
Restart the device.
If this does not solve the problem, contact your dealer.
This wireless firmware version does not operate on this device.
This wireless firmware version does not work on this device.
Contact your dealer.
Wireless settings are incomplete.
Wireless is not operating because the settings are incomplete.
Try the Wireless Network Selection or automatic settings again.
If this does not solve the problem, initialize the network settings, and then try the manual settings or automatic settings again.
Not connected to wireless access point.
Not connected to a wireless access point.
Check that the wireless access point power is switched on.
Check the wireless access point settings, and then try the Wireless Network Selection or automatic settings.
Firmware Update Error Please try again. If network doesn’t work, please try firmware update over USB.
This message indicates that the remote FW update failed.
Scanning function and print function is prohibited.
However, the process of MJL/PJL command is possible.
Registering with Google Cloud Print. Don’t turn off the power untill registration is complete.
Deleting from Google Cloud Print.
PDL Error
An error occurred when PDL data that was sent from the printer driver was being analyzed.
Send the PDL data again.
Caution, unknown Consumable detected. Go to User Manual «Trouble Shooting» to restore operation. Error: 709
You can use any consumables in your product, but you must accept the risks of using non-genuine consumables.
If the use of non-genuine consumables causes damage to the product or results in your product not functioning to its full specification, then such damage or effect on the product is not covered by warranty.
To accept these risks and to restore function;
1. Turn off your product.
2. Press and hold the CLEAR button and turn your product on.
3. After start up, release the CLEAR button.
Note: This operation will be recorded for future reference.
Non Recommended Toner
Use the toner cartridge which is recommended for use in this type of the MFP.
Copyright © 2014 Oki Data Corporation. All rights reserved.